How to Change the Color of A Straw Hat for Stylish & Fashion Sense

A straw hat can be given new life by being dyed. You can use a dauber to apply the color or experiment with patterns.

It’s easy to get creative with hat dyeing once you’ve mastered the fundamentals.

how to change the color of a straw hat by yourself

How to Change the Color of a Straw Hat?

Some of the methods to change the color of your straw hat include; dyeing, wood stain paint, and spray painting.


use dyeing to change the color of a straw hat

Dyeing is very ideal to add vivid color to your straw hat. Your hat will stand out with this method.

– Tools you need

  • Straw hat
  • Damp cloth
  • Latex gloves
  • Newspapers or plastic cover for work surface
  • Bucket
  • Liquid dye
  • Color fixative
  • Dauber or other applicators

– Step by step guide of this method

1. Before dyeing your hat, remove any dirt or residue from the straw hat by wiping it down with a moist cloth.

2. Then use newspaper or a plastic sheet to shield the work surface. Wear latex gloves to keep your hands safe.

3. Prepare your bucket, and follow the manufacturer’s directions for preparing the liquid dye bath.

4. Place the straw hat that has been cleaned on the work table. Dip the dauber or other applicator into the liquid dye directly.

5. Make sure to apply the dye evenly around the hat, allowing it to sink into the fibers. To create a consistent hue, apply the paint with even strokes.

6. To achieve the desired effect, apply another layer of dye.

7. Spray the hat with a color fixative when you are satisfied with the color’s uniformity. Give it at least 30 minutes to dry before attempting any further work on it.

Also Read: How to Stretch A Cowboy Hat Properly for the Best Fit?

Wood Stain Paint

use wood stain to change the color of a straw hat

This is a good way to add natural color and appearance to your straw hat. If you are tired of too light white and want a distressed feeling, try this method freely.

– Tools you need

  • A straw hat
  • Damp cloth
  • Latex gloves
  • Wood Stain Paint (eg Minwax)
  • Stiff bristle brush

– Step by step guides

1. Choose the most appropriate wood stain color.

2. To clean the straw hat, simply wipe the stain with the pre-moistened cloths. Your straw hat should be dust and debris-free before adding any wax.

3. Dip in the paint and blot off the excess paint on the brush. Then brush on your straw hat with a circular motion.

You should be able to see where the stain was applied to the straw hat.

4. Wipe away any excess with a clean rag and allow it dry for an hour.

5. Apply another layer for a richer color and luster.

Also Read: How to Block A Hat?

Spray Paint

use spray paint to change the color of a straw hat

Your straw hat will last and remain airy if you use spray paint. Spray paint can also enhance your appearance in photographs.

After you remove the tape, spray the hat with a clear coat to expose the design. To avoid inhaling the fumes, use a spray-on cap outside in a well-ventilated area.

– Tools you need

  • Spray paints
  • Your favored color
  • A hot glue gun
  • 1 meter of Pompom trim

– Instructions

1. Make sure the hat is clean and that you have eliminated any unnecessary trims.

2. Spray the paint. A cardboard box makes a good spraying surface because it’s easy to discard once you’re done.

Only a small portion of the can will be consumed if you apply only one coat.

3. Wait for the primer to dry before applying the second coat.

4. Allow the paint to dry.

5. Use a hot glue gun to attach the pompom trim.

6. There you go! Have fun with your new hat!

Also Read: How to Keep a Cowboy Hat on in the Wind?


1. Can you spray paint a straw hat?

With any acrylic paint, spray paint, etc., you can apply multiple light coatings on a straw hat. Using spray paint on a straw hat is a great way to add color to mesh parts.

2. What kind of paint works on straw hats?

A moist application of acrylic paint can attach to a straw hat pretty well. It is useless to wear these fibers if they are left to their own devices.

In order to see how well it worked, you can try with a piece of cloth that is comparable to the hat’s material.

3. Can you color a straw hat?

You can color the straw hat to any color you desire. Applicators can be dipped straight into the dye from a block or dauber.

Using a sponge, dab each layer of the hat evenly with the color. Use even strokes to ensure that the color is uniform.


Weaved from natural or synthetic straw or straw-like materials, or from plants, a straw hat is known for its brim.

More importantly, straw hats are available in a wide range of colors and can even be re-colored. With any acrylic paint, spray paint, etc.

You can apply multiple light coatings on a straw hat. But remember that it’s important for spray painters to operate in a well-ventilated area.

Besides, the can should be held about an inch or two away from the hat to prevent the paint from clogging the holes.